Troubleshooting Idrac Direct (Usb Xml Configuration); Troubleshooting Idrac Direct (Laptop Connection) - Dell DL4300 Owner's Manual
Appliance
Hide thumbs
Also See for DL4300:
- Deployment manual (33 pages) ,
- Getting started (2 pages) ,
- Getting started with your system (2 pages)
Table of Contents
Advertisement
Troubleshooting iDRAC Direct (USB XML configuration)
For information about USB storage device and server configuration, see the Integrated Dell Remote
Access Controller User's Guide at Dell.com/idracmanuals.
Steps
1.
Ensure that your USB storage device is connected to the front USB Management Port, identified by
icon.
2.
Ensure that your USB storage device is configured with an NTFS or an FAT32 file system with only
one partition.
3.
Verify that the USB storage device is configured correctly. For more information about configuring
the USB storage device, see the Integrated Dell Remote Access Controller User's Guide at Dell.com/
idracmanuals.
4.
In the iDRAC Settings Utility, ensure that USB Management Port Mode is configured as Automatic
or iDRAC Direct Only.
5.
Ensure that the iDRAC Managed: USB XML Configuration option is either Enabled or Enabled only
when the server has default credential settings.
6.
Remove and reinsert the USB storage device.
7.
If import operation does not work, try with a different USB storage device.
Next steps
If all troubleshooting fails, see the Getting help section.
Related Links
Getting help
Troubleshooting iDRAC Direct (Laptop connection)
For information about USB laptop connection and server configuration, see the Integrated Dell Remote
Access Controller User's Guide at Dell.com/idracmanuals.
Steps
1.
Ensure that your laptop is connected to the front USB Management Port, identified by
a USB Type A/A cable.
2.
On the iDRAC Settings Utility screen, ensure that USB Management Port Mode is configured as
Automatic or iDRAC Direct Only.
3.
If the laptop is running Windows operating system, ensure that the iDRAC Virtual USB NIC device
driver is installed.
4.
If the driver is installed, ensure that you are not connected to any network through WiFi or cabled
ethernet, as iDRAC Direct uses a non-routable address.
Next steps
If all troubleshooting fails, see the Getting help section.
Related Links
Getting help
178
icon with
Advertisement
Table of Contents
Troubleshooting
