Initializing The Tpm For Bitlocker Users; Initializing The Tpm For Txt Users - Dell DL4300 Owner's Manual
Appliance
Hide thumbs
Also See for DL4300:
- Deployment manual (33 pages) ,
- Getting started (2 pages) ,
- Getting started with your system (2 pages)
Table of Contents
Advertisement
Related Links
Safety instructions
Safety instructions
Before working inside your system
After working inside your system
Installing the system board
Initializing the TPM for BitLocker users
Initialize the TPM.
For more information about initializing the TPM, see
cc753140.aspx.
The TPM Status changes to Enabled, Activated.
Initializing the TPM for TXT users
1.
While booting your system, press F2 to enter System Setup.
2.
On the System Setup Main Menu screen, click System BIOS → System Security Settings.
3.
From the TPM Security option, select On with Pre-boot Measurements.
4.
From the TPM Command option, select Activate.
5.
Save the settings.
6.
Restart your system.
7.
Enter System Setup again.
8.
On the System Setup Main Menu screen, click System BIOS → System Security Settings.
9.
From the Intel TXT option, select On.
http://technet.microsoft.com/en-us/library/
169
Advertisement
Table of Contents
Troubleshooting
