Installing The Optional Front Bezel - Dell DL4300 Owner's Manual

Figure 9. Removing the optional Quick Sync front bezel
1. release latch
3. Quick Sync bezel

Installing the optional front bezel

Prerequisites
Follow the safety guidelines listed in the Safety instructions section.
Steps
1. Locate and remove the bezel key.
NOTE: The bezel key is attached to the back of the bezel.
2. Hook the right end of the bezel onto the chassis.
3. Fit the free end of the bezel onto the system.
4. Lock the bezel by using the key.
60
2. bezel lock