Installing The System Cover - Dell DL4300 Owner's Manual

Figure 12. Removing the system cover
1. system cover
3. latch release lock
Next steps
1. Install the system cover.

Installing the system cover

Prerequisites
1. Follow the safety guidelines listed in the Safety instructions section.
2. Ensure that all internal cables are connected and placed out of the way and no tools or extra parts
are left inside the system.
Steps
1. Align the slots on the system cover with the tabs on the chassis.
2. Push the system cover latch down to move the system cover into the closed position.
The system cover slides forward and the slots on the system cover engage with the tabs on the
chassis. The system cover latch locks into place when the system cover is completely engaged with
the tabs on the chassis.
3. Rotate the latch release lock clockwise to the locked position.
2. latch
63