Installing The Network Daughter Card - Dell DL4300 Owner's Manual
Appliance
Hide thumbs
Also See for DL4300:
- Deployment manual (33 pages) ,
- Getting started (2 pages) ,
- Getting started with your system (2 pages)
Table of Contents
Advertisement
Figure 61. Removing the NDC
1.
captive screw socket (2)
3.
captive screw (2)
5.
network daughter card (NDC)
Next steps
1.
Install the NDC.
2.
If removed, install the expansion card(s) on the expansion card riser 2.
3.
Follow the procedure listed in the After working inside your system section.
Related Links
Safety instructions
Before working inside your system
After working inside your system
Installing the network daughter card
Prerequisites
1.
Follow the safety guidelines listed in the Safety instructions section.
2.
Follow the procedure listed in the Before working inside your system section.
2.
connector on the system board
4.
touch point (2)
6.
back panel slot for Ethernet connectors
127
Advertisement
Table of Contents
Troubleshooting
