Safety Features; Brake Lever; Identification Of Symbols - Partner P350S Instruction Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 3
IDENTIFICATION (WHAT IS WHAT?)
1
16
17
18
19
20
1.
Saw chain
2.
Guide Bar
3.
Spark Arrester Screen
4.
Chain Brake Lever / Hand
Guard
5.
Front Handle
6.
Starter Handle
7.
ON/OFF Switch
8.
Safety Trigger

SAFETY FEATURES

Numbers preceding the descriptions correspond with the numbers above to help you locate
the safety feature.
1 LOW KICKBACK SAW CHAIN helps
significantly reduce kickback, or the
intensity of kickback, due to specially
designed depth gauges and guard
links.
3 SPARK ARRESTER SCREEN retains
carbon
and
other
particles over 0.023 inches (0.6mm)
in size from engine exhaust flow.
Compliance with local, state and
federal
laws and/or
governing the use of a spark arrester
screen
is
the
user's
bility. See
Safety
Precautions
additional information.
4 CHAIN

BRAKE LEVER

GUARD protects the operator's left
hand in the event it slips off the front
handle while saw is running.

IDENTIFICATION OF SYMBOLS

Read and understand the Instr-
uction Manual and all warning
labels before using the machine.
4
3
2
15
13
14
21
22
9.
Rear Handle / Boot Loop
10. Oil Tank cap
11. Fuel Tank Cap
12. Starter Cover
13. Spiked Bumper
14. Bar Retaining Nuts
15. Muffler Shield
16. Spark Plug
17. Air Cleaner Cover
4 CHAIN BRAKE is a safety feature
designed to reduce the possibility of
injury due to kickback by stopping a
moving saw chain in milliseconds. It is
activated by the CHAIN BRAKE lever.
7 STOP
flammable
the engine when tripped. Stop switch
must be pushed to ON position to start
or restart engine.
8 SAFETY TRIGGER prevents acciden-
regulations
tal acceleration of the engine. Throttle
trigger
responsi-
unless the safety latch is depressed.
for
22 CHAIN CATCHER reduces the danger
of injury in the event saw chain breaks
/
HAND
or derails during operation. The chain
catcher is designed to intercept a
whipping chain.
-- 2 --
5
6
7
8
12
11
10
9
23
18. Choke Lever for Auto
Choke
19. Primer Bulb
20. Throttle/Trigger
21. Saw Chain Adjustment
Screw
22. Chain Catcher
23. Guide-bar Cover
SWITCH immediately
(20)
cannot
be squeezed
Primer Bulb
stops

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents