Search Tuning - Fm; Manual Tuning - Fm; Fm Stereo / Mono - Roberts SOUND 48 Manual

Search tuning - FM

1 Fully extend the wire aerial.
2 Press the Mode button until FM is selected.
3 Give a long press on Tuning Up or Down for several seconds. Your clock
radio will scan upwards (low to high frequency) or downwards (high to low
frequency) and will stop automatically when it finds a station of sufficient
strength.
4 If the signal is strong enough and there is RDS data present then the
radio will display the station name.
5 Adjust the Volume.

Manual tuning - FM

1 Press Tuning Up or Down buttons to tune to a station. The frequency
will change in steps of 50 kHz.
2 Adjust the volume.

FM stereo / mono

1 If an FM station is received with a weak signal some hiss may be
audible. To reduce the hiss, press the Select button. The display will
show 'MONO'. Your radio will switch to mono mode.
2 To return to stereo mode press the Select button again the display will
show 'AUTO'. The radio will switch to stereo mode.
9
40
DAB FM
Mode