The Display
PM/AM Indicators
Low Backup
Battery Indicator
Sleep Mode Indicator
Setting Up the Unit
• Connect the included AC adaptor to the DC jack
located on the back of the unit and connect the other
end to a working wall outlet to power the unit and
charge K-Cell.
• Connect the included FM antenna to the FM Antenna
Jack located on the back of the unit and extend for best
FM radio reception.
• Remove the Battery Pull Tab before using the unit. 1
CR2450
battery is included for battery backup to
maintain clock settings in case of power failure. See
page 19 for more on installing and replacing backup
battery.
Mode/Wake to
Alarm Source Indicators:
Radio Mode Indicator
Bluetooth device,
Radio frequency, Tone
Time Display
Alarm Active Indicator
Bluetooth Indicator
RESET
TEST
6
K2