Automatic Mode; Manual Mode - Leica Rugby 820 User Manual

3.4
Description of the

Automatic Mode

3.5
Description of the

Manual Mode

Changing the X-axis
to Manual Mode
Rugby 820/830, Operation
Automatic Mode
The Rugby always starts up in Automatic Mode.
In Automatic Mode the Rugby automatically levels if set up within the 6° self-levelling
range.
Manual Mode
After start-up the Manual Mode can be activated. In Manual Mode the self-levelling will
be deactivated. The following options are available:
• Change the X-axis to Manual Mode
• Change the Y-axis to Manual Mode
• Change to Full Manual Mode

After turning the Rugby off and on again, the Rugby is in Automatic Mode.
After startup, press the Automatic/Manual Mode Button once to change the X-axis to
Manual Mode.

The X-axis and Y-axis are marked on the top of the Rugby.
• The X-axis does not self-level and a slope can be entered in this axis using the Up
and Down Arrow buttons on the Rugby.
• The X-axis LED is red.
• The Y-axis continues to self-level and the Y-axis
LED flashes green until level.
When the X-axis is in Manual Mode, the X-axis can be sloped upwards or downwards
as illustrated.
004634_001
19