Menu; Pairing The Rod Eye 180 With The Rugby 820 - Leica Rugby 820 User Manual

4.3
Menu access and
navigation

Menu

4.4
Pairing step-by-step
Rugby 820/830, Receivers
Menu
To access the menu of the Rod Eye 160/Rod Eye 180 Digital Receivers, press the
Bandwidth button and Audio button simultaneously.
• Use the Bandwidth button and Audio button to change parameters.
• Use the Power button to scroll through the menu.
Menu Function
UNT Changes the unit of measure for the
digital readout.
LED Changes the brightness of the LED
indicators.
DRO Turns on or off the digital readout. Green LED is on: digital readout is on.
BAT Turns on or off the Laser low battery
indication on the receiver.
MEM Turns on or off the position memory
function.
RPS Measures the head speed of the
laser.

Hold in rotating beam to
measure the head speed.

Pairing the Rod Eye 180 with the Rugby 820

The Rugby 820 and the Rod Eye 180 include radio devices that allow the user to
automatically match an existing grade.
When purchased together, the Rugby 820 and Rod Eye 180 have been paired together
at the factory. If purchasing a second receiver, the Rugby 820 and the Rod Eye 180
must first be paired together to be able to communicate with each other.
Step Description
1. Turn off the Rugby 820 and the Rod Eye 180.
2. Press and hold the Power button on the Rugby 820 for 5 seconds to turn on
the Rugby 820 in pairing mode. The Rugby 820 beeps five times.
3. Press and hold the Power button on the Rod Eye 180 for 5 seconds.

The X-axis Indicator LED and the Y-axis Indicator LED flash green and the
Rugby 820 beeps five times quickly when the pairing was successful.
The X-axis Indicator LED and the Y-axis Indicator LED flash red five times
quickly if the pairing was not successful.
Indication
Units - mm/cm/in/ft

Active unit flashes.
LEDs - High/Low/Off
Red LED is on: digital readout is off.

DRO flashes.
Green LED is on: Laser low battery icon
function is active.
Red LED is on: Laser low battery icon
function is not active.

Rugby icon flashes.
Green LED is on: function is on.
Red LED is on: function is off.

Full down arrow flashes.
Measured head speed is displayed.
24