Leica Rugby 820 User Manual page 20

Changing the Y-axis
to Manual Mode
Changing to Full
Manual Mode
Rugby 820/830, Operation
Press the Automatic/Manual Mode button again to change the Y-axis to Manual Mode.

The X-axis and Y-axis are marked on the top of the Rugby.
• The Y-axis does not self-level and a slope can be entered in this axis using the Up
and Down Arrow buttons on the Rugby.
• The Y-axis LED is red.
• The X-axis continues to self-level and the X-axis
LED flashes green until level.
When the Y-axis is in Manual Mode, the Y-axis can be sloped upwards or downwards
as illustrated.
004635_001
Press the Automatic/Manual Mode button again to change to Full Manual Mode.

The X and Y axes are marked on the top of the Rugby.
• Both the X-axis and Y-axis do not self-level and a slope can be entered in the X-axis
using the Up and Down Arrow buttons on the Rugby.
• The X-axis LED is red.
• The Y-axis LED is red.
When both the X-axis and Y-axis are in Manual Mode, the X-axis can be sloped using
the Up and Down Arrow buttons.
004636_001
20