Dhcp - Planet ADE-3400 User Manual

Field
IP Address
Subnet Mask
Secondary IP
Link Speed/Duplex Mode
ETHERNET Status Table
MAC Address Control
New MAC Address
Current Allo wed MAC
Address Table

3.4.1.2 DHCP

Dynamic Host Configuration Protocol (D HCP) allows the individual PC to obt ain the
TCP/IP configuration from the centralized DHCP server. You can configure this router as a
DHCP server or disable it. The DHCP server can assign IP address, IP default gateway,
and DNS s erver to DHCP clients. This router can also act as a surrogate DHCP server
(DHCP proxy) where it relays IP address assignment from an actual real DHCP server to
clients. You can enable or disable DHCP server or DHCP proxy.
Click DHCP in the left pane, the page shown in the following figure appears.
Description
Enter the IP address of LAN interface. It is
recommended to use an address from a block that
is reserved for private us e. This address block is
192.168.1.1- 192.168.255.254.
Enter the subnet mask of LAN interface. The
range of subnet mask is from
255.255.0.0-255.255.255.254.
Select it to enable the secondary LAN IP address.
The two LAN IP addresses must be in the different
network.
Select the Link S peed/Duplex Mode whic h you
need.
This table will show the current link mode.
If you want to use the MAC address control
feature, select it and add the MAC address.
Add the MAC address which you want can access
the router via the LAN port.
This t able will sho w the current allo wed MAC
address .
27