Field
Add
Delete
3.6.3 QoS
Choose Advance > QoS , the page shown in the follo wing figure appears. Entries in t he
QoS Rule List are used to assign the precedence for each incoming p
physical LAN port, TCP/UDP port number, source IP address, destination IP address and
other information.
Step 1 : Enable IP QoS and click Apply to enable IP QoS function.
Step 2 : Click add rule to add a new IP QoS rule.
The page shown in the following figure appears.
Description
Choose RIP1 indicates the router
messages only.
Choose RIP2 indicates the router
messages only.
Click it to add the RIP interface to the Rip Config List.
Select a ro w in the Rip Config List and click it to delete the
row.
46
broadcast s RIP1
multicast s RIP2
acket based on