5.2.4 Advanced Routing
You can add or delete routing rules, and enable or disable dynamic routing protocol on the page.
The page includes the following fields:
Object
Destination
Range
Gateway
Interface
Comment
Current Routing Table in the System
You can delete or reset the routing rules.
Dynamic Routing Settings
You can enable or disable the RIP.
After finishing the settings above, click Apply to enable the new routing rule to take effect. Otherwise, click
Reset to cancel the new routing rule.
Description
Enter the legal destination IP address.
Destination IP address is a host address or the network address.
Enter the specific gateway.
The interface for this route. You can select LAN, WAN and Custom.
Add the description of this route.
49
User Manual of VC-230/230N