Ignition Switch Wiring - CrimeStopper RS-800 Installation Instructions Manual

6 PIN HIGH-CURRENT CONNECTORS:
PIN 1: BROWN 14 GA.:
PIN 2: GRAY 14 GA.:
PIN 3: RED 14 GA.:
PIN 4: RED 14 GA.:
PIN 5: PINK 14 GA.:
PIN 6: WHITE 18 GA.:
NOTE: Heavy duty/High Current Ignition circuits greater than 30 AMPS, such as those found on Work or Industrial
vehicles, require high-current relays. DO NOT use the outputs of the RS800/801 for High-Current systems or you will risk
damaging the unit and creating a hazardous condition! Use Part #CS-403 relays for circuits up to 70 amps.
PARKING
LIGHTS
+10A MAX.
FUEL
PUMP
+ -
COIL
TRANSMISSION
ECU

IGNITION SWITCH WIRING

STARTER OUTPUT (30A)
ACCESSORY / IGNITION 2 (30A)
BATTERY CONSTANT FUSED (30A)
BATTERY CONSTANT FUSED (30A)
IGNITION 1 (30A)
(+) PARKING LIGHTS (10A)
WHITE
PINK
ENGINE
ECU
2nd IGN 1
OR
2nd IGN 2
H/V/AC
RED
FUSE
30A
RED
FUSE
30A
BROWN
GRAY
STARTER
IGN 1
IGN 2
+
-
BATTERY