CrimeStopper CoolStart RS800 Series II Operating Instructions

Crimestopper security products operating instructions remote engine starting system rs800 series ii

Hide thumbs Also See for CoolStart RS800 Series II:

CONGRATULATIONS on your choice of a CoolStart™ Remote Engine Starter by Crimestopper Security Products

Inc. This booklet contains the information necessary for using & maintaining your remote start system. If any

questions arise, contact your installation dealer or Crimestopper Security Products Inc. at (800) 998-6880.

CRIMESTOPPER SECURITY PRODUCTS, INC. and its VENDORS shall not be liable for any accident resulting from the use of this

equipment. This system is designed to be professionally installed onto a vehicle in which all items, such as parking brake and all

associated components, door switches, transmission shift linkage, throttle linkage, and all engine safety features, are in perfect

working condition.

DO NOT install this Remote Engine Starting System on MANUAL TRANSMISSION vehicles. If accidentally left in gear the

vehicle could become a self-propelled threat to life and property.

IT IS ABSOLUTELY THE OWNER'S SOLE RESPONSIBILITY TO: A) Understand the operation of this system and its safety

features. B) Check for proper operation of these safety features prior to accepting delivery of the vehicle from the installation facility.

C) Check and maintain the condition of the vehicle and all items relative to the proper operation of this system and its safety features.

D) Always leave the doors and windows closed and locked to protect against accident and theft.

DO NOT remote start the vehicle in a closed garage. Make sure that the garage door is open or there is adequate ventilation.

Failure to observe this rule could result in injury or death from poisonous Carbon Monoxide fumes.

IT IS ABSOLUTELY THE OWNERS SOLE RESPONSIBILITY TO: make certain the vehicle PARKING BRAKE is properly adjusted

and will hold the vehicle securely in all parking conditions, and to periodically check and maintain proper adjustment.

This device complies with FCC Rules part 15. Operation is subject to the following two

conditions: 1) This device may not cause interference, and (2) this device must accept

any interference that may be received, including interference that may cause

undesired operation.

REV. A 09.10.01

interference caused by unauthorized modification to this equipment. Such modification

could void the user's authority to operate the equipment.

RS800 Series

Remote Engine Starting System

OPERATING INSTRUCTIONS

OPERATION CAUTIONS & WARNINGS

The manufacturer is not responsible for any radio or TV

Table of Contents

Need help?

Do you have a question about the CoolStart RS800 Series II and is the answer not in the manual?

Page 1 OPERATION CAUTIONS & WARNINGS CRIMESTOPPER SECURITY PRODUCTS, INC. and its VENDORS shall not be liable for any accident resulting from the use of this equipment. This system is designed to be professionally installed onto a vehicle in which all items, such as parking brake and all associated components, door switches, transmission shift linkage, throttle linkage, and all engine safety features, are in perfect working condition.
Page 2 OPERATING THE REMOTE TRANSMITTER The transmitter supplied with this RS800 system has (2) buttons / channels. LOCK/ UNLOCK REMOTE ENGINE STARTING - SUCCESSFUL START: 1) Press and release the remote start button. 2) Parking lights flash once, then turn ON along with the IGN/ACC circuits 3) After 6 seconds Starter Motor engages.
Page 3 REMOTE ENGINE CONTROL REMOTE ENGINE STARTING - UNSUCCESSFUL START In the event that the engine does not start on the first attempt, the system shuts down for a few seconds, then attempts to restart the engine a 2 and 3 time.
Page 4 4 flashes for the 4 code. If all 4 codes are learned, the unit will automatically exit code learning mode, otherwise turn key off and close hood. CRIMESTOPPER SECURITY PRODUCTS, INC. 1770 SOUTH TAPO ST. SIMI VALLEY, CA. 93063 TRANSMITTER PROGRAMMING...