CrimeStopper RS-800 Installation Instructions Manual page 3

YELLOW / YELLOW/WHITE (-) IGN. & (-) ACC. OUTPUTS (GROUND WHEN RUNNING):
YELLOW
OR
(YELLOW/WHITE)
PIN 4: YELLOW/BLACK: (-) ANTI-GRIND/STARTER KILL OUTPUT (OPTIONAL)
Use this wire for the negative side of the Anti-Grind/Starter Disable relay. It can also be used as a sensor disable circuit
for a host alarm for an RS801 installation. This output activates whenever a remote start is requested, and when the
vehicle is remotely locked with the transmitter. The output can also be programmed to activate passively. (See diagram)
MOTOR
WIRING INSTRUCTIONS
2nd IGN 1
OR
(2nd ACC)
IGN 1
TO
IGN 2
ACC
START
BROWN
YELLOW/BLACK
MAKE CERTAIN TO CONNECT "BROWN" START OUTPUT WIRE TO
MOTOR SIDE OF ANTI-GRIND/START DISABLE RELAY.
85
86
+
30 87
CUT
85 86
-
BATTERY