CrimeStopper RS-800 Installation Instructions Manual
  1. Manuals
  2. Brands
  3. CrimeStopper Manuals
  4. Remote Starter
  5. RS-800
  6. Installation instructions manual
CrimeStopper RS-800 Installation Instructions Manual

CrimeStopper RS-800 Installation Instructions Manual

Remote engine starting system
Hide thumbs Also See for RS-800:
Table of Contents

Advertisement

Quick Links

See also: Operating Instructions
To ease and reduce installation time, we suggest you consider the following points before starting:
1. Determine most suitable locations for all components to be placed. These components include: The module itself,
valet/program button, possible extra relays, and antenna/receiver (RS800 Model Only).
2. Allow enough wire to create a service loop with strain relief, should servicing be required. This will also allow easier
access and mounting.
3. Use a Volt/Ohm meter to test and locate all connections. Test Lights can damage a vehicle's computer systems.
4. Record all color codes of vehicle wiring to be used for reference. This will save time by not having to re-test the same
wires over again.
5. Additional Parts, which are not included with this unit, may be needed for your particular vehicle. These items may
include extra relays, Anti-Theft Bypass modules, or Transponder Bypass modules.
TECHNICAL SUPPORT: 1-800-998-6880
Monday - Friday 8:00am - 4:30pm Pacific Time
Web Site: www.crimestopper.com
E-mail: tech-support@crimestopper.com
CRIMESTOPPER SECURITY PRODUCTS, INC.
1770 S. TAPO STREET, SIMI VALLEY, CA. 93063
RS800ER / RS801
REMOTE ENGINE STARTING SYSTEM

INSTALLATION INSTRUCTIONS

PRE-INSTALLATION CONSIDERATIONS
This device complies with FCC Rules part 15. Operation is subject
to the following two conditions: (1) This device may not cause
harmful interference, and (2) This device must accept any
interference that may be received, including interference that may
cause undesired operation. The manufacturer is not responsible
for any radio or TV interference caused by unauthorized
modifications to this equipment. Such modification could void the
user's authority to use the equipment.

Advertisement

Table of Contents
loading

Related Manuals for CrimeStopper RS-800

Summary of Contents for CrimeStopper RS-800

  • Page 1: Installation Instructions

    Anti-Theft Bypass modules, or Transponder Bypass modules. TECHNICAL SUPPORT: 1-800-998-6880 Monday - Friday 8:00am - 4:30pm Pacific Time Web Site: www.crimestopper.com E-mail: tech-support@crimestopper.com CRIMESTOPPER SECURITY PRODUCTS, INC. 1770 S. TAPO STREET, SIMI VALLEY, CA. 93063 RS800ER / RS801 REMOTE ENGINE STARTING SYSTEM INSTALLATION INSTRUCTIONS This device complies with FCC Rules part 15.

  • Page 2: Installation Cautions & Warnings

    INSTALLATION CAUTIONS & WARNINGS **FOR SAFETY REASONS, DO NOT INSTALL RS800/801 in vehicles with MANUAL TRANSMISSIONS.** If accidentally left in gear, a remote started vehicle could become a self-propelled threat to life and property. WARNING: This system does NOT have engine over-rev protection. Make certain vehicle throttle linkage operates properly and does not stick.
  • Page 3 YELLOW / YELLOW/WHITE (-) IGN. & (-) ACC. OUTPUTS (GROUND WHEN RUNNING): YELLOW (YELLOW/WHITE) (2nd ACC) PIN 4: YELLOW/BLACK: (-) ANTI-GRIND/STARTER KILL OUTPUT (OPTIONAL) Use this wire for the negative side of the Anti-Grind/Starter Disable relay. It can also be used as a sensor disable circuit for a host alarm for an RS801 installation.
  • Page 4 WIRING INSTRUCTIONS PIN 5: EMPTY (NOT USED) PIN 6: GREEN: RS801 START ACTIVATION (-) TRIGGER INPUT This wire allows the Auxiliary Channel Output of a separate (host) Alarm or Keyless Entry System to activate a Remote Start when installing the RS801 model. A 1 second (-) Negative pulse on the Green wire will trigger/stop a remote start. PIN 7: GRAY: (-) HOOD PIN SWITCH Connect the Gray wire to a switch that is at ground when the hood is open.

  • Page 5: Ignition Switch Wiring

    6 PIN HIGH-CURRENT CONNECTORS: PIN 1: BROWN 14 GA.: STARTER OUTPUT (30A) PIN 2: GRAY 14 GA.: ACCESSORY / IGNITION 2 (30A) PIN 3: RED 14 GA.: BATTERY CONSTANT FUSED (30A) PIN 4: RED 14 GA.: BATTERY CONSTANT FUSED (30A) PIN 5: PINK 14 GA.: IGNITION 1 (30A) PIN 6: WHITE 18 GA.:...

  • Page 6: Power Door Lock Wiring

    3 PIN DOOR LOCK PLUG: PIN 1: GREEN: (-) Negative pulse for LOCK PIN 2: RED: +12V Coil Power for external relays TERM 86. PIN 3: BLUE: (-) Negative pulse for UNLOCK DETERMINING DOOR LOCK TYPE: We recommend determining the type of locking system the vehicle has before connecting any wires.

  • Page 7: "Smart" Tachless Mode

    REVERSE POLARITY DOOR LOCK WIRING GREEN BLUE MASTER SWITCH This RS800 includes custom monitoring circuitry allowing the unit to start an engine without the use of a Tach Wire. The module actively monitors the vehicle over the life of the installation regardless of weather or battery conditions. The “Smart”...
  • Page 8 Tach source due to RF noise or Computer Data. The RS800/801 may not detect a clean signal. Call Crimestopper for Tech Support if you cannot locate a proper tach source for your vehicle. “SMART” TACHLESS MODE...
  • Page 9 TACH REFERENCE PROGRAMMING: 1. Open hood (Gray wire must be grounded). 2. Connect WHITE/RED wire to a valid Tach source. 3. Start engine with key. 4. Press program button 5 times, then wait for 5 light flashes. 5. Wait at least one second then push program button slowly (4) times, you should get a light flash after each button press.

  • Page 10: Option Programming

    This system has several installer programmable features as listed in the chart below. Option Programming: 1. Open hood (Gray wire grounded) 2. Turn Key to the ON position 3. Press program button 5 times, after a few seconds the unit will flash the lights 5 times. 4.

  • Page 11: Remote Start Troubleshooting

    REMOTE START TROUBLESHOOTING UNIT FLASHES LIGHTS ONCE AND WILL NOT ATTEMPT A START: The unit is in Valet mode. Turn IGN ON, press and hold valet/programming button for about 4 seconds until LED goes out. The unit is now out of valet mode and should perform a remote start. UNIT FLASHES LIGHTS TWICE AND WILL NOT ATTEMPT A START: The unit reads a fault at the Brake (Purple wire is active) or the Hood is OPEN (Gray wire grounded).
  • Page 12 ENGINE TRANSMISSION COIL PARKING LIGHTS 12A MAX. SMART TACH JUMPERS RS-800ER RS-801 ANTENNA/ RECEIVER PLUG ANTENNA (-) LOCK OUTPUT PROGRAM/ OVERRIDE +12 V FOR RELAYS SWITCH (-) UNLOCK OUTPUT NOTE: USE EXTERNAL RELAYS FOR HIGH-CURRENT FUEL PUMP H/V/AC CONTROL IGN 1 BROWN GRAY PINK...

This manual is also suitable for:

Rs801Rs800er

Table of Contents