D-Link DAP-3410 User Manual page 12

Section 2 - Installation
Power
A. Connect the Ethernet cable (connected to the AP in STEP 1) from the AP to the "P+DATA OUT" port on the
PoE Injector.
B. Connect an Ethernet cable from a router/switch or PC to the "DATA IN" port on the PoE Injector.
C. Attach the power adapter to the connector labeled "POWER IN" on the PoE Injector, and attach it into an
electrical outlet.
D-Link DAP-3410 User Manual
STEP 2: Connect the AP to Your Network
PoE Injector
P+DATA OUT
C
B
DATA IN
AP
A
12