D-Link DAP-3410 User Manual page 46

Section 3 - Configuration
Enable HTTP:
Select this checkbox to enable access to the
console via HTTP. The port which the console
will use for connections can also be specified.
Enable HTTPS:
Select this checkbox to enable access to the
console via HTTPS. The port which the console
will use for connections can also be specified.
Enable Telnet:
Select this checkbox to enable access to the
console via Telnet. The port which the console
will use for connections can also be specified.
Enable SSH:
Select this checkbox to enable access to the
console via SSH. The port which the console
will use for connections can also be specified.
In order to use this feature, you will need to
click on the Generate Key button to create an
SSH key.
Host Key
This will display the SSH key generated by the
Footprint:
AP.
Enable UPnP:
Select this checkbox to enable UPnP support
for the management console on the AP.
SNMP v2c:
Check the box to enable the SNMP v2c
functions. This option is disabled by default.
RO Enter the read only community string.
Community:
RW Enter the read & write community string.
Community:
D-Link DAP-3410 User Manual 46