D-Link DAP-3410 User Manual page 47

Section 3 - Configuration
SNMP v3:
Check the box to enable the SNMP v3 functions.
This option is disabled by default.
SNMP ro user:
Enter the username for read only SNMP access.
SNMP ro
Enter the password for read only SNMP access.
password:
SNMP rw user:
Enter the username for read/write SNMP
access.
SNMP rw
Enter the password for read/write SNMP access.
password:
SNMP Trap:
Check the box to enable the sending of Trap
Status messages.
Community:
Set a community string required by the remote
host computer that will receive trap messages
or notices send by the system.
IP 1 to 4:
Enter the IP addresses of the remote hosts to
receive trap messages.
D-Link DAP-3410 User Manual 47