Maintenance; Administration Settings - D-Link DAP-3410 User Manual

Section 3 - Configuration
This page will allow you to change a number of settings that are
used by the device administrator such as changing the password
used to access the device, as well as the method of accessing
the device remotely and from what IP address the device can be
remotely managed from.
Limit Check this to limit administrator access to
Administrator specific IP ranges only.
IP:
IP Range: Enter the IP address range that the administrator
will be allowed to log in from and then click the
Add button.
System Name:
Enter a name for the device. The default name
is D-Link DAP-3410.
Description: Enter a description for the device and its role.
Location: Enter the physical location of the device, e.g.
72nd Floor, D-Link HQ.
Login Name: Enter a user name. The default is admin.
Old Password / You can change your password by entering
New Password: the old password, then entering the new
password and entering it again to confirm it.
The password is case-sensitive and should be
between 0 and 12 characters.
D-Link DAP-3410 User Manual

Maintenance

Administration Settings

45