Table of Contents
Advertisement
Crestron TPS-XVGAL RGB Computer Interface Card for TPS/Lectern Panel
RGB Computer Interface Card for
TPS/Lectern Panel: TPS-XVGAL
Description
Functional Description
The TPS-XVGAL RGB computer interface card is an optional feature
designed for Crestron's Isys™ wall/lectern mounted TPS user interfaces.
NOTE: TPS user interfaces include all TPS touchpanels and the
touchpanel interface unit.
Through an RGB window on a page within the uploaded VisionTools™
Pro-e (VT Pro-e) touchpanel project, the card allows computer video to
be displayed on the touchpanel full screen or in a window. Non-
interlaced input video resolutions of up to 1600x1200 are supported. The
resolutions are supported by scaling or sub-sampling in the H-direction
and scaled down in the V-direction to the native resolution (or lower) of
the interface. Lower resolutions may be scaled up to fill the screen.
Optional TPS user interface setups are also available to utilize the
TPS-XVGAL. Serial mouse control driver software and instructions to
integrate a Boeckeler Pointmaker® Video Marker telestrator with the
TPS user interface are provided. For further information, refer to
"Appendix: Optional TPS User Interface Setups" that begins on page 13.
Physical Description
The TPS-XVGAL, shown on the next page, is a printed circuit board
(PCB) designed to be installed into a specific expansion slot in the TPS
user interface. The card contains a 60-pin connector that attaches directly
to the motherboard of the interface and the card is secured with four
attached knurled mounting screws. Computer video input is through five
BNC connectors although, depending upon the individual installation,
Operations & Installation Guide - DOC. 5945
RGB Computer Interface Card for TPS/Lectern Panel: TPS-XVGAL • 1
Advertisement
Table of Contents
