Knx Control Interface: Ci-Knx; Introduction; Features And Functions; Specifications - Crestron CI-KNX Operations & Installation Manual

Crestron CI-KNX

KNX Control Interface: CI-KNX

Introduction

Operations & Installation Guide – DOC. 0008
The Crestron CI-KNX is a control interface by which a Crestron control system can
be coupled to a KNX (previously known as KNX) installation using Ethernet
(TCP/IP). Also, the Crestron CI-KNX filters the desired information out of received
KNX messages and sends them to the Crestron control system via the TCP/IP
interface, which provides the Crestron installation with live updates of the KNX
installation.
The Crestron CI-KNX offers functionality to program separate KNX objects. This
results in a new and flexible method for programming your KNX system.

Features and Functions


DIN-rail mountable

Control up to 250 Objects on a KNX network

Equipped with a TCP/IP port

Capable of using Power Over Ethernet

Capable of sending live updates. No polling necessary

Capable of addressing and controlling separate KNX objects

Specifications

Specifications for the Crestron CI-KNX are listed in the following table.
Crestron CI-KNX Specifications
SPECIFICATION
Power
Power Usage
Minimum 2-Series Control
KNX Control Interface
DETAILS
External power supply 12-24V AC or 12-30V
DC
Alternative: 'Power-over-Ethernet'
Power consumption: < 800 mW
Version 2 or later
KNX Control Interface: Crestron CI-KNX  1