Crestron TPS-XVGAL Operating & Installation Manual page 10

RGB Computer Interface Card for TPS/Lectern Panel Crestron TPS-XVGAL
Installation Diagram 2 of 7 - Remove Rear Cover
Installation Diagram 3 of 7 - Remove Blank Plate
6 • RGB Computer Interface Card for TPS/Lectern Panel: TPS-XVGAL
3. As shown below, remove the rear cover by sliding it towards
the bottom of the unit.
4. Refer to the diagram below. Using a #1 Phillips screwdriver,
loosen and remove the two screws that secure the blank plate
and remove the plate. The screws and plate may be discarded.
Operations & Installation Guide - DOC. 5945