Table of Contents
Advertisement
RGB Computer Interface Card for TPS/Lectern Panel Crestron TPS-XVGAL
Installation Diagram 5 of 7 - Install Rear Cover
Installation Diagram 6 of 7 - Install Rear Cover Screws
8 • RGB Computer Interface Card for TPS/Lectern Panel: TPS-XVGAL
7. As shown below, install the rear cover by sliding it over the
TPS-XVGAL video input connectors.
8. Refer to the diagram below. Re-install the ten cover screws to
finger-tight then, using a #1 Phillips screwdriver, tighten the
mounting screws an additional 1/8-turn to secure cover.
Operations & Installation Guide - DOC. 5945
Advertisement
Table of Contents
