Physical Description - Crestron TPS-XVGA Operations & Installation Manual

RGB Computer Interface Card for TPS/Tilt Panel

Physical Description

The TPS-XVGA, shown below, is a printed circuit board (PCB) designed
to be installed into a specific expansion slot in the TPS touchpanel. The
card is secured to the motherboard of the touchpanel with four supplied
mounting screws. The card contains a 60-pin connector that attaches
directly to the motherboard and a standard DB15 mini-computer video
connector. The video connector (labeled RGB on the touchpanel) is
accessible at the rear of the touchpanel base. Mounted on top of the card
is a cooling fan assembly to maintain the proper operating temperature of
the card during operation.
TPS-XVGA Side View
TPS-XVGA Top View
2 RGB Computer Interface Card for TPS/Tilt Panel: TPS-XVGA
COMPUTER
VIDEO INPUT
CONNECTOR
(14.88 cm)
FAN ELECTRICAL
CONNECTOR
TOUCHPANEL
MOTHERBOARD
CONNECTOR
5.86 in
Operations & Installation Guide - DOC. 5944
Crestron TPS-XVGA
1.21 in
(3.07 cm)
4.02 in
(10.21 cm)