Crestron TPS-IMW Operation Manual page 8

Wall-Mounted Interface Module
AUDIO INPUT
The port mates with a six-position mini-terminal block connector
(supplied) and provides balanced and/or unbalanced audio input. A
description of the pinouts is shown in the following table.
AUDIO INPUT Pinouts
PIN
S
R +
R -
MIC OUT
The port mates with a three-position mini-terminal block connector
(supplied) and produces line level differential output. Description of the
pinouts is shown in the following table.
MIC OUT Pinouts
PIN
+
-
S
NET/VIDEO (To Panel)
NET/ This 10-pin RJ-45 connection mates with the TPS-3000, TPS-4000,
VIDEO
TPS-5000, or TPS-6000 touchpanel. Refer to the descriptions and pinout
1
table that follow this paragraph. The 10-pin net/video cable assembly to
connect the touchpanel to the TPS-IMW is supplied. Even though the
8-pin audio cable may fit into the port, do not use it.
This port provides the Cresnet connection to the touchpanel. This port
also provides composite or S-video input for the built-in video card (with
the purchase of a TPS-3000, TPS-4000, or installation of the
TPS-VID-1/2 in a TPS-5000 or TPS-6000 touchpanel). Consult the latest
revision of the TPS-3000 Operations Guide (Doc. 6076), TPS-4000
Operations Guide (Doc. 6268) or TPS-VID-1/2 Operations & Installation
Guide (Doc. 6059) for details.
4 • Wall-Mounted Interface Module: TPS-IMW
DESCRIPTION
Shield
Right Positive
Right Negative
DESCRIPTION
Positive
Negative
Shield
Crestron TPS-IMW
PIN DESCRIPTION
L + Left Positive
L- Left Negative
S Shield
Operations Guide – DOC. 5857A