Crestron TPS-IMW Operation Manual page 13

Crestron TPS-IMW
Hardware Hookup Connections to the Back of the TPS-IMW
BALANCED VIDEO INPUTS
USING TWISTED PAIR CABLE:
COMPOSITE OR S-VIDEO
MICROPHONE OUTPUT:
PROVIDES LINE-LEVEL
BALANCED OUTPUT
A video source can be connected to a TPS-3000, TPS-4000, or a
TPS-VID1/2 installed in a TPS-5000 or TPS-6000 touchpanel. The
TPS-IMW allows for the connection of balanced or unbalanced video
signals using twisted pair cable. Refer to the following diagrams to
connect balanced or unbalanced video signals.
Balanced Video Connection
JUMPERS
REMOVED.
If there is no video signal, do not make a connection to the port, but leave
the connector with the jumpers attached to the NTSC/PAL VIDEO six-
position mini-terminal block connector on the TPS-IMW.
Operations Guide – DOC. 5857A
+ - S + - S
COMP
C Y
NTSC/PAL
VIDEO
Wall-Mounted Interface Module: TPS-IMW • 9
Wall-Mounted Interface Module
Unbalanced Video Connection
JUMPERS
REMAIN IN
PLACE.
+ - S + - S
COMP
C Y
NTSC/PAL
VIDEO
CRESNET:
TO CONTROL SYSTEM AND
OTHER CRESNET DEVICES
AUDIO INPUT:
LINE-LEVEL, BALANCED &
UNBALANCED AUDIO SOURCES