DFI HD310-Q87 User Manual page 81

6. Select Change Intel(R) ME Password then press Enter.
You will be prompted for a password. The default password is "admin". Enter the default
password in the space provided under Intel(R) ME New Password then press Enter.
• 8-32 characters
• Strong 7-bit ASCII characters excluding : , and " characters
• At least one digit character (0, 1, ...9)
• At least one 7-bit ASCII non alpha-numeric character, above 0x20, (e.g. !, $, ;)
• Both lower case and upper case characters
Intel(R) Management Engine BIOS Extension v9.0.0.0024/Intel(R) ME v9.0.10.1372
Copyright(C) 2003-12 Intel Corporation. All Rights Reserved.
INTEL (R) ME PLATFORM CONFIGURATION
Change ME Password
Local FW Update <Enabled>
Intel (R) ME New Password
[] = Move Highlight [Enter] = Select Entry
Chapter 7 Intel AMT Settings
Chapter 7
[Esc]= Exit
81
7. Select Local FW Update then press Enter. Select Enabled then press Enter.
Intel(R) Management Engine BIOS Extension v9.0.0.0024/Intel(R) ME v9.0.10.1372
Copyright(C) 2003-12 Intel Corporation. All Rights Reserved.
INTEL (R) ME PLATFORM CONFIGURATION
Change ME Password
Local FW Update <Enabled>
Disabled
Enabled
Password Protected
[] = Move Highlight [Enter] = Complete Entry [Esc]= Discard Changes
8. Select Previous Menu until you return to the Main Menu. Select Intel(R) AMT Con-
figuration then press Enter.
Intel(R) Management Engine BIOS Extension v9.0.0.0024/Intel(R) ME v9.0.10.1372
Copyright(C) 2003-12 Intel Corporation. All Rights Reserved.
INTEL (R) AMT CONFIGURATION
Manageability Feature Selection
> SOL/ IDER/ KVM
> User Consent
Password Policy
> Network Setup
Activate Netwok Access
Unconfi gure Network Access
> Remote Setup And Confi guration
> Power Control
[] = Move Highlight [Enter] = Select Entry
< Enabled>
<Anytime>
<Full Unprovision>
[Esc]= Exit
www.dfi .com