Table of Contents
Advertisement
Intel(R) Ethernet Network Connection i217-LM - 00:01:29:...
(Only for reference)
This section is used to configure the parameters of the Gigabit Ethernet device.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Advanced
PORT CONFIGURATION MENU
NIC Confi guration
Blink LEDs (range 0-15 seconds)
0
PORT CONFIGURATION INFORMATION
UEFI Driver:
Intel(R) 1GbE DEV 5.1.00
Adapter PBA:
FFFFFF-OFF
Chip Type:
Intel PCH LPT
PCI Device ID
153A
PCI Bus: Device: Function:
0:25:0
Link Status
[Disconnected]
Factory MAC Address:
00:01:29:54:63:56
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
NIC Configuration
This field is used to configure the network device.
Blink LEDs
Blink LEDs for the specified duration (up to 15 seconds).
Link Status
This field indicates the link status of the network device.
Chapter 3 BIOS Setup
Chapter 3
Intel(R) I210 Gigabit Network Connection - 00:01:29:54...
(Only for reference)
This section is used to configure the parameters of the Gigabit Ethernet device.
Click to confi gure the
network device port.
Select Screen
Select Item
Enter:
Select
+/ -:
Change Opt.
F1:
General Help
F2:
Previous Values
F3:
Optimized Defaults
F4:
Save and Reset
ESC:
Exit
44
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Advanced
PORT CONFIGURATION MENU
NIC Confi guration
Blink LEDs (range 0-15 seconds)
0
PORT CONFIGURATION INFORMATION
UEFI Driver:
Intel(R) 1GbE DEV 5.1.00
Adapter PBA:
001300-000
Chip Type:
Intel i210
PCI Device ID
1533
PCI Bus: Device: Function:
2:0:0
Link Status
[Disconnected]
Factory MAC Address:
00:01:29:54:63:55
Alternate MAC Address:
00:01:29:54:63:55
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
NIC Configuration
This field is used to configure the network device.
Blink LEDs
Blink LEDs for the specified duration (up to 15 seconds).
Link Status
This field indicates the link status of the network device.
Alternate MAC Address
Alternates assigned MAC address of Ethernet port.
Click to confi gure the
network device port.
Select Screen
Select Item
Enter:
Select
+/ -:
Change Opt.
F1:
General Help
F2:
Previous Values
F3:
Optimized Defaults
F4:
Save and Reset
ESC:
Exit
www.dfi .com
Advertisement
Table of Contents
