Usb Power Select; Power-On Select - DFI HD310-Q87 User Manual

USB Power Select

3
2
1
USB 8-9
(JP4) 1-2 On: +5V
(default)
USB 2-3/6-7
(JP8)
3
2
1
1-2 On: +5V
(default)
JP4, JP5, JP6, JP8 and JP18 are used to select the power of the USB devices. Selecting +5V_
standby will allow you to use a USB device to wake up the system.
Important:
If you are using the Wake-On-USB Keyboard/Mouse function for 2 USB ports, the
+5V_standby power source of your power supply must support ≥1.5A. For 3 or more
USB ports, the +5V_standby power source of your power supply must support ≥2A.
Chapter 2 Hardware Installation
3
2
1
2-3 On:
+5V_standby
3
2
1
1-2 On: +5V
USB 0-1
(default)
(JP5)
USB 4-5
3
(JP6)
2
1
2-3 On:
+5V_standby
USB 10-11
(JP18)
3
2
1
2-3 On:
+5V_standby
Chapter 2

Power-on Select

JP10 is used to select the method of powering on the system. If you want the system to
power-on whenever AC power comes in, set JP10 pins 2 and 3 to On. If you want to use the
power button, set pins 1 and 2 to On.
When using the JP10 "Power-On" feature to power the system back on after a power failure
occurs, the system may not power on if the power lost is resumed within 5 seconds (power
flicker).
16
3
2
1
1-2 On:
Power-on via power button
(default)
JP10
3
2
1
2-3 On:
Power-on via AC power
www.dfi .com