PCH-FW Configuration
This section is used to configure the parameters of Management Engine Technology.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Advanced
ME FW Version
9.0.10.1372
ME Firmware Mode
Normal Mode
ME Firmware Type
Full Sku Firmware
ME Firmware SKU
5MB
Firmware Update Confi guration
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Firmware Update Configuration
Enables or disables the Me FW Image Re-Flash function.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Advanced
Me FW Image Re-Flash
[Disabled]
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Chapter 3 BIOS Setup
Chapter 3
AMT Configuration
This section configures the parameters of Active Management Technology.
Confi gure Management
Engine Technology
Parameters
Select Screen
Select Item
Enter: Select
+/ -:
Change Opt.
F1:
General Help
F2:
Previous Values
F3:
Optimized Defaults
F4:
Save & Reset
ESC: Exit
Enable/Disable Me FW
Image Re-Flash function.
Select Screen
Select Item
Enter: Select
+/ -:
Change Opt.
F1:
General Help
F2:
Previous Values
F3:
Optimized Defaults
F4:
Save & Reset
ESC: Exit
38
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Advanced
Intel AMT
[Enabled]
Un-Confi gure ME
[Disabled]
Disable ME
[Disabled]
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Intel AMT
Enables or disables the AMT function.
Un-Configure ME
Selects Enabled to un-configure the ME function without a password.
Disable ME
Sets ME to soft temporary disabled.
Enable/Disable Intel(R)
Active Management Tech-
nology BIOS Extension.
Note: iAMT H/W is
always enabled.
This option just controls
the BIOS extension execu-
tion. If enabled, this re-
quires additional fi rmware
in the SPI device.
Select Screen
Select Item
Enter:
Select
+/ -:
Change Opt.
F1:
General Help
F2:
Previous Values
F3:
Optimized Defaults
F4:
Save and Reset
ESC:
Exit
www.dfi .com