Access Flow2 Manual page 33

2015.04.16
5.8 Mode 8
D = set the C value, I = set the P value
D = set the C value, I = set the P value
E
D = set the C value, I = set the P value
Park positions are shown with dot next to number.
Only existing positions are shown
Multiple settings can be entered and stored at once
Call & Park
Mode 8
5:C0P
Set call and park unit 0
C = Halt position, P = Park position
E
6:C1P
Set call and park unit 1
C = Halt position, P = Park position
E
13:C8P
Set call and park unit 8
C = Halt position, P = Park position
www.ThyssenKruppAccessibility.com
Flow2 - Stairlift
D&I
Tab 06: Systematic fault finding
Main menu
*PING*
Settings saved
E 2s