Access Flow2 Manual page 22

2015.04.16
Error code
Error message
Description
Safety action
Possible solution
Error suppressed in
Error code
Error message
Description
Safety action
Possible solution
Error suppressed in
Error code
Error message
Description
Safety action
Possible solution
Error suppressed in
Error code
Error message
Description
Safety action
Possible solution
Error suppressed in
Flow2 - Stairlift
F76
Battery needs charging
This error code appears after the lift has been placed on a charging contact
after code F21 has occurred (voltage <19V). The batteries have to be charged
to a minimum voltage of 25V by default and then the F76 will disappear.
Normal stop
Let the stair lift charge the batteries
Mode -3- / ELD mode
F77
Main motor temperature too high
The temp. of the main motor has risen to a critical level
Normal stop
Let cool down.
Mode -3-
F78
Level motor temperature too high
The temp. of the level motor has risen to a critical level
Normal stop
Let cool down.
Mode -3-
F83
Level sensors are off, but there's drive moment
Sensors are off while the drive is moving
Emergency stop / Stop level drive
Reboot the lift
Mode -3-
www.ThyssenKruppAccessibility.com
Tab 06: Systematic fault finding