AC Infinity CLOUDLINE User Manual page 22

POWERING AND SETUP
T-SERIES
STEP 3
Plug the sensor probe into the controller's
3.5mm jack. Set the probe near your plants in
your grow tent for the most accurate reading.
Keep the probe cord away from your HID*
grow light ballast's power cord to ensure the
controller properly detects climate conditions.
*MH, HPS, CMH, or CHPS
STEP 4
Plug the fan's power cord into a wall outlet.
Make sure it is plugged into one that is separate
from your grow light's outlet.
The controller will receive power from the fan to
operate. (EC Motor fans only)
22