Table of Contents
Advertisement
CRESTRON
Graphical Detail View of a Touchpanel in SIMPL Windows' Programming Manager
For this overly simplified example, there is only one logic symbol used. Use the
Programming Manager to select and assign signals to the Interlock symbol, shown
below.
Graphical Detail View of an Interlock in SIMPL Windows' Programming Manager
The signals from the Interlock are used as feedback into the touchpanel as well as to
drive the relay card that resides in the first slot of the CNMS. Use the Programming
Manager to select and assign signals to the Relay card symbol, shown below.
Graphical Detail View of the Relay Card in SIMPL Windows' Programming Manager
18
Series 3000 Touchpanels
Operations Guide - DOC. 8094B
Advertisement
Table of Contents
