Table of Contents
Advertisement
Programming
Operations Guide - DOC. 8094B
CRESTRON
The text pointer is a single letter, 'A' through 'Z' or 'a' through 'z' preceded by the
"at" symbol (@). If [text...] is omitted, the text field is cleared. If [text...] exists, it
is added to the text field. For example, consider the following string :
@CNow is the time<cr>
@Cfor all good men<cr>
@Cto come to the<cr>
@Caid of the party.<cr>
Assuming that a button with an @C text pointer was being displayed, the contents
of the button would be changed to:
Now is the time
for all good men
to come to the
aid of the party.
NOTE: To clear the text field for this example, type in "@C<cr>".
As each line is entered, the display is updated. Since the text may be placed in
several different buttons, no boundary checking is done to see if the text fits in the
button. If the text overflows the boundaries, it remains centered about the center of
the button.
Save Setup and Run Program
The Save Setup and Run Program button, located at the upper right corner of the
Main Menu, saves all of the setup information to EEPROM and displays the main
page that has been programmed into your system.
Reserved Join Numbers
A reserved join number is a feature of the software that enables a designer to create
a button on a page that either calls up the Setup Menu, selects brightness, etc. The
table below provides a list of reserved join numbers available within the software.
Reserved Join Numbers for Series 3000 Touchpanels
JOIN NUMBER
1016
1017
1018
1019
1023
1024
1035
Workshop Versus SIMPL Windows
The print date of this Operations Guide occurs so precariously close to the official
release of SIMPL Windows that an exemplary discussion of both programming
methods should coexist. The Workshop is Crestron's DOS-based programming
FUNCTION
Brightness
Brightness
Brightness
Brightness
Contrast
Contrast
Call up Setup Menu
Series 3000 Touchpanels
VALUE
Off
Low
Medium
High
Up
Down
Not Applicable
15
Advertisement
Table of Contents
