Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Crestron CT-1550
Summary of Contents for Crestron CT-1550
- Page 1 Crestron CT-1550 Wired 5.7 Inch Tabletop Touchpanel Operations Guide...
- Page 2 This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2004 Crestron Electronics, Inc.
-
Page 3: Table Of Contents
Crestron CT-1550 Contents Wired 5.7 Inch Tabletop Touchpanel: CT-1550 Introduction ... 1 Functions and Features ... 1 Specifications ... 2 Physical Description... 3 Industry Compliance ... 5 Setup ... 5 Network Wiring... 5 Identity Code ... 6 Configuring the Touchpanel... 6 Hardware Hookup ... -
Page 5: Wired 5.7 Inch Tabletop Touchpanel: Ct-1550
Wired 5.7 Inch Tabletop Touchpanel: CT-1550 Introduction Functions and Features The CT-1550 Wired 5.7 Inch Tabletop Touchpanel provides user interface to a Crestron onscreen feedback for real-time confirmation of commands, and gives users simplified command of their control environment. Customized graphic icons let users easily control any function. -
Page 6: Specifications
Weight 1.85 lb (0.84 kg) The latest versions can be obtained from the Crestron website. Refer to NOTE after last footnote. Crestron 2-Series control systems include the AV2 and PRO2. Consult the latest Crestron Product Catalog for a complete list of 2-Series control systems. -
Page 7: Physical Description
Physical Views of CT-1550 Operations Guide – DOC. 6116A Wired 5.7 Inch Tabletop Touchpanel Bottom view (6 - - - 1) 6-Pin RJ-11 Connector (Refer to Page 9 for Pinout) Wired 5.7 Inch Tabletop Touchpanel: CT-1550 • 3... - Page 8 Wired 5.7 Inch Tabletop Touchpanel Physical Views of CT-1550 (continued) Four rubber feet on the underside of the unit are for stability and to prevent slippage on flat surfaces. 4 • Wired 5.7 Inch Tabletop Touchpanel: CT-1550 Crestron CT-1550 Operations Guide – DOC. 6116A...
-
Page 9: Industry Compliance
Crestron warranty. CAUTION: Provide sufficient power to the system. Insufficient power can lead to unpredictable results or damage to the equipment. Please use the Crestron Power Calculator to help calculate how much power is needed for the system (http://www.crestron.com/calculators). -
Page 10: Identity Code
The Main Menu, shown to the left of this paragraph, appears when a finger is held to the touchscreen for about three seconds from the powered down state. This screen indicates that you are in “setup mode” and can proceed to configure the touchpanel. 6 • Wired 5.7 Inch Tabletop Touchpanel: CT-1550... -
Page 11: Calibration Menu
0 and 120 minutes. The SAVE TIMEOUT button saves the current value. Pressing the RETURN button returns you to the Setup menu. Operations Guide – DOC. 6116A Wired 5.7 Inch Tabletop Touchpanel Wired 5.7 Inch Tabletop Touchpanel: CT-1550 • 7... -
Page 12: Interface Menu
Doing so can crack the screen and damage the touchpanel. The CT-1550 touchpanel has rubber pads on the underside of its base so that it can rest on a horizontal surface. The only connection necessary is made to the 6-pin RJ-11 connector mounted in the bottom of the unit base. -
Page 13: Recommended Cleaning
Crestron’s True Blue Support, log in at http://support.crestron.com. First-time users will need to establish a user account. You can create a program that allows you to set up the CT-1550 to operate a Crestron control system using the Crestron programming tools Crestron SystemBuilder™... -
Page 14: Programming With The Crestron Systembuilder
It provides a well-designed graphical environment with a number of workspaces (i.e., windows) in which a programmer can select, configure, program, test, and monitor a Crestron control system. SIMPL Windows offers drag and drop functionality in a familiar Windows This section describes a sample SIMPL Windows program that includes a CT-1500 touchpanel. -
Page 15: C2Net-Device Slot In Configuration Manager
Expanded PRO2 System Tree C2Net-Device Slot in Configuration Manager To incorporate a CT-1550 into the system, drag the CT-1550 from the Touchpanels | Touchpanels (Cresnet) folder of the Device Library and drop it in System Views. The PRO2 system tree displays the touchpanel in Slot 9, with a default Net ID of 03, as shown in the illustration after the following note. - Page 16 Setting the Net ID in Device Settings Double-click the CT-1550 icon to open the “Device Settings” window. This window displays the CT-1550 device information. If necessary, select the Net ID tab to change the touchpanel Net ID, as shown in the following figure.
- Page 17 CT-1550 Input/Output Signals The CT-1550 symbol provides up to 999 digital and 255 analog input and output joins, and up to 127 serial input joins. The programmer selects the signal types by clicking on the appropriate button at the top of the Symbol Detail view when programming the panel.
-
Page 18: Programming With Vt Pro-E
Device Extenders, refer to Doc. 6120, Crestron SIMPL Windows Symbol Guide, or the on-line help included with SIMPL Windows. Example Program An example program for the CT-1550 is available from the “Example Program” section of the Crestron website (http://www.crestron.com/exampleprograms for CT-1550.ZIP. -
Page 19: Reserved Join Numbers
For additional software information, refer to the help file provided with the software. The latest version of VT Pro-e can be obtained from the Crestron website. Reserved Join Numbers A reserved join number is a feature of the software that enables a designer to create a button on a touchpanel page that completes a predetermined function. -
Page 20: Uploading And Upgrading
Other models, even from the same manufacturer, may not yield the same results. Connection to the CT-1550 touchpanel is via a 6-pin RJ-11 connector in the base of the unit. Therefore, uploading or upgrading must be accomplished through a control system. - Page 21 Crestron CT-1550 available from the Crestron website. Refer to the following figure for a typical connection diagram when uploading files. Typical Connection Diagram when Uploading Files Setup | Communications Settings Command Operations Guide – DOC. 6116A Wired 5.7 Inch Tabletop Touchpanel 1.
-
Page 22: Uploading A Simpl Windows Program
COM port and baud rate. If communication cannot be established, refer to the “Troubleshooting Communications” section in the latest version of the Crestron 2-Series Control Systems Reference Guide (Doc. 6256) or the respective Operations Guide for the control system. - Page 23 4. To verify that the program has been transferred successfully, select Diagnostics | Report Program Information. This should display a window that provides details about the current program loaded into the control system. Wired 5.7 Inch Tabletop Touchpanel: CT-1550 • 19...
-
Page 24: Uploading A Vt Pro-E Project
2. As shown after this step, select File Transfer | Send Touchpanel (alternatively, press Alt+T) from the Viewport menu. 3. As shown after this step, select the Net ID of the CT-1550 touchpanel and then click OK. The “Open” window appears (refer to the subsequent graphic). -
Page 25: Firmware Upgrade
2. As shown after this step, select File Transfer | Update Touchpanel Firmware from the Viewport menu. 3. As shown after this step, select the Net ID of the CT-1550 touchpanel and then click OK. The “Open” window appears (refer to the subsequent graphic). - Page 26 Wired 5.7 Inch Tabletop Touchpanel “Select Network ID” Window “Open” Window 22 • Wired 5.7 Inch Tabletop Touchpanel: CT-1550 4. Browse to the .csf file and click Open to begin the transfer. Crestron CT-1550 Operations Guide – DOC. 6116A...
-
Page 27: Problem Solving
Crestron CT-1550 Problem Solving Troubleshooting The table below and on the next page provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron customer service representative. CT-1550 Troubleshooting Project cannot be uploaded to touchpanel: 1. -
Page 28: Further Inquiries
For assistance in your local time zone, refer to the Crestron website (http://www.crestron.com/) for a listing of Crestron worldwide offices. You can also log onto the online help section of the Crestron website to ask questions about Crestron products. First-time users will need to establish a user account to fully benefit from all available features. -
Page 29: Software License Agreement
This Agreement may only be modified by a writing signed by an authorized officer of Crestron. Updates may be licensed to You by Crestron with additional or different terms. This is the entire agreement between Crestron and You relating to the Software and it supersedes any prior representations, discussions, undertakings, communications or advertising relating to the Software. - Page 30 “applets” incorporated into the Software), the accompanying media and printed materials, and any copies of the Software are owned by Crestron or its suppliers. The Software is protected by copyright laws and international treaty provisions. Therefore, you must treat the Software like any other copyrighted material, subject to the provisions of this Agreement.
-
Page 31: Return And Warranty Policies
CRESTRON shall not be liable to honor the terms of this warranty if the product has been used in any application other than that for which it was intended, or if it has been subjected to misuse, accidental damage, modification, or improper installation procedures. - Page 32 Crestron Electronics, Inc. Operations Guide – DOC. 6116A 15 Volvo Drive Rockleigh, NJ 07647 12.04 Tel: 888.CRESTRON Fax: 201.767.7576 Specifications subject to www.crestron.com change without notice.
Need help?
Do you have a question about the CT-1550 and is the answer not in the manual?
Questions and answers