Table of Contents
Advertisement
Professional Audio Distribution Processor
Problem Solving
24 • Professional Audio Distribution Processor: CNX-BIPAD8
"Open" Window
4. Browse to the desired upg file and click Open to begin the transfer.
Troubleshooting
The table below provides corrective action for possible trouble situations. If further
assistance is required, please contact a Crestron customer service representative.
CNX-BIPAD8 Troubleshooting
POSSIBLE
TROUBLE
CAUSE(S)
CNX-BIPAD8 does
Incorrect power
not function.
supply.
Power LED does
CNX-BIPAD8 is not
not Illuminate
receiving power.
NET LED does not
Loose network
illuminate
connection.
Improper NET ID.
ROOM 1-8 LEDs
Improper
do not illuminate.
programming.
Audio not balanced
Room not set up.
or poor sound
quality.
Hum on audio.
Grounding problem. Either connect or remove chassis ground wire.
Crestron CNX-BIPAD8
CORRECTIVE ACTION
Use a Crestron power supply.
Verify that cable plugged into NET port is
secure. Ensure sufficient NET power to support
all NET devices.
Verify that cable plugged into NET port is
secure.
Verify that CNX-BIPAD8 NET ID matches NET
ID software program. Refer to "Identity Code" on
page 9 of this operations guide.
Confirm signal names and programmming logic
so that LEDs respond when functions are
activated.
Room must be set up from a touch panel to
adjust bass, treble, balance, etc.
Operations Guide - DOC. 8160A
Advertisement
Table of Contents
