Table of Contents
Advertisement
Crestron CNX-BIPAD8
Programming Software
Have a comment about
Crestron software?
Direct software related suggestions
and/or complaints to Crestron via
email (software@crestron.com).
Do not forward any queries to this
address. Instead refer to "Further
Inquiries" on page 25 for assistance.
Operations Guide – DOC. 8160A
Professional Audio Distribution Processor
Earliest Version Software Requirements for the PC
NOTE: Crestron recommends that you use the latest software to take advantage of
the most recently released features. The latest software is available from the
Downloads | Software Updates section of the Crestron website (www.crestron.com).
The following are the earliest useable software version requirements for the PC:
•
SIMPL Windows version 1.61.12 or later with library update file 132 or
later (requires SIMPL+ Cross Compiler version 1.1).
•
Crestron Database version 15.6.8 or later. Required by SIMPL Windows.
Programming with SIMPL Windows
NOTE: The following assumes that the reader has knowledge of SIMPL Windows.
If not, refer to the extensive help information provided with the software.
NOTE: The following are acceptable file extensions for programs that include a
CNX-BIPAD8, developed for specific control system types:
.smw projectname.smw (source file)
.spz
projectname.spz (compiled file for 2-series)
.bin
projectname.bin (compiled file for CNX generation)
.csz
projectname.csz (compiled file for CNX generation with SIMPL+)
.ush
projectname.ush (compiled file for CNX generation with SIMPL+
header file)
.usp
projectname.usp (source code module for SIMPL+)
NOTE: In the following description, the PRO2 control system is used.
SIMPL Windows is Crestron's software for programming Crestron control systems.
It provides a well-designed graphical environment with a number of workspaces
(i.e., windows) in which a programmer can select, configure, program, test, and
monitor a Crestron control system. SIMPL Windows offers drag and drop
functionality in a familiar Windows
This section describes a sample SIMPL Windows program that includes a
CNX-BIPAD8.
Configuration Manager is where programmers "build" a Crestron control system by
selecting hardware from the Device Library. In Configuration Manager, drag the
PRO2 from the Control Systems folder of the Device Library and drop it in the upper
pane of the System Views. The PRO2 with its associated communication ports is
displayed in the System Views upper pane.
PRO2 System View
The System Views lower pane displays the PRO2 system tree (refer to the following
graphic). This tree can be expanded to display and configure the communications
ports.
Professional Audio Distribution Processor: CNX-BIPAD8 • 15
®
environment.
Advertisement
Table of Contents
