Physical Description - Crestron CNX-BIPAD8 Operation Manual

Professional Audio Distribution Processor
CNX-BIPAD8 Front Panel
CNX-BIPAD8 Rear Panel
4 • Professional Audio Distribution Processor: CNX-BIPAD8
NOTE: Outputs from the RCA and RJ-45 CAT5 connectors (ROOMS 1-8) are the
same signals. The RCA outputs first pass through preamplifier and tone/volume
control circuits; the balanced outputs from the CAT5 connectors are unprocessed.
NOTE: Crestron software and any files on the website are for Authorized Crestron
dealers and Crestron Authorized Independent Programmers (CAIP) only. New users
may be required to register to obtain access to certain areas of the site (including the
FTP site).

Physical Description

The CNX-BIPAD8 is housed in a black enclosure with labeling on the front and rear
panels. Ten LEDs on the front panel indicate the unit's current status. All
connections are made to the back of the unit. Refer to the following illustrations of
the front and rear panels and the physical views on the next page.
Two mounting ears are provided for rack mounting, and four square rubber feet are
supplied for stability and to prevent slippage in tabletop placement or stacking
configurations.
Crestron CNX-BIPAD8
Operations Guide - DOC. 8160A