D-Link AC1200 User Manual page 111

DIR-842V2 AC1200 Wi-Fi Gigabit Router
User Manual
Parameter
Hostname
Figure 99. Configuring the local interface. The IPv4 tab. The Dynamic IP Addresses section.
Parameter
Mode of dynamic IP
address assignment
The name of the device assigned to its IPv4 address in the local
subnet. For Wi-Fi clients, the device is not available by the domain
name, if multicasting is disabled in the additional settings of Wi-Fi.
Dynamic IP Addresses
An operating mode of the router's DHCP server.
• Disable: The router's DHCP server is disabled, clients' IP
addresses are assigned manually.
• Server: The router assigns IP addresses to clients
automatically in accordance with the specified parameters.
When this value is selected, the Start IP, End IP, Lease
time fields and the DNS relay switch are displayed on the
tab. Also when this value is selected, the DHCP Options,
Static IP Addresses, and Hosts sections are displayed on
the tab.
Relay: An external DHCP server is used to assign IP
•
addresses to clients. When this value is selected, the
External DHCP server IP, Option 82 Circuit ID,
Option 82 Remote ID, and Option 82 Subscriber ID
fields are displayed on the tab. Available if the Mobile
Internet, Router, or WISP Repeater mode was selected
in the Setup Wizard.
Page 111
Configuring via Web-based Interface
Description
Description