D-Link AC1200 User Manual page 48

DIR-842V2 AC1200 Wi-Fi Gigabit Router
Configuring via Web-based Interface
User Manual
In order to connect your device to a wireless ISP (WISP), on the Device mode page, from the
Connection method list, select the Autonomous value. Then from the Work mode list select
the WISP Repeater value. In this mode you can connect your device to another access point,
configure a WAN connection, set your own settings for the wireless network in the 2.4GHz and
5GHz bands, and set your own password for access to the web-based interface of the device.
Figure 38. Selecting an operation mode. The WISP Repeater mode.
Page 48