D-Link AC1200 User Manual page 155

DIR-842V2 AC1200 Wi-Fi Gigabit Router
User Manual
On the opened page, you can specify the following parameters:
Parameter
Enable
Hostname
DDNS service
Username
Password
Interface
Update period
After specifying the needed parameters, click the SAVE button.
To specify other parameters for a DDNS service, select the relevant line in the table. On the opened
page, change the needed parameters and click the SAVE button.
To remove settings for a DDNS service, select the checkbox located to the left of the relevant line in
the table and click the DELETE button (
Move the switch to the right to enable DDNS.
Move the switch to the left to disable DDNS.
Enter the full domain name registered at your DDNS provider.
If you want to use another domain name of this DDNS provider,
click the ADD HOST button, and in the line displayed, enter the
needed value.
To remove a domain name, click the Delete icon ( ) in the line of
the name.
Select the DDNS provider from the drop-down list. If your provider
is not in the list, select the Custom provider value and fill in the
fields displayed on the page. Specify the DDNS provider name in
the Name field, the domain name of the provider's server in the
Server field, and the location of settings in the Path field.
The username to authorize for your DDNS provider.
The password to authorize for your DDNS provider.
Show icon ( ) to display the entered password.
From the drop-down list, select a WAN connection which will be
used for DDNS, or leave the Default gateway value.
An interval (in minutes) between sending data on the router's
external IP address to the relevant DDNS service.
).
Page 155
Configuring via Web-based Interface
Description
Click the