Administration - D-Link AC1200 User Manual

DIR-842V2 AC1200 Wi-Fi Gigabit Router
User Manual

Administration

On the Management / Administration page, you can change the password for the administrator
account used to access the web-based interface of the router and to access the device settings via
TELNET and SSH, restore the factory defaults, backup the current configuration, restore the
router's configuration from a previously created file, save the changed settings to the non-volatile
memory, reboot the device, or change the web-based interface language.
In order to change the password for the administrator account, in the User section, enter a new
password in the New password and Password confirmation fields. Use digits, Latin letters
(uppercase and/or lowercase), and other characters available in the US keyboard layout.
Show icon ( ) to display the entered values.
Remember or write down the new password for the administrator account. In case of losing
!
the new password, you can access the settings of the router only after restoring the factory
default settings via the hardware RESET button. This procedure wipes out all settings that
you have configured for your router.
To change the web-based interface language, select the needed value from the Language drop-
down list.
18 0-9, A-Z, a-z, space, !"#$%&'()*+,-./:;<=>?@[\]^_`{|}~.
Figure 168. The Management / Administration page.
Page 174
Then click the SAVE button.
Configuring via Web-based Interface
Click the
18