Ipsec - D-Link AC1200 User Manual

DIR-842V2 AC1200 Wi-Fi Gigabit Router
Configuring via Web-based Interface
User Manual

IPsec

On the Functions / Advanced / IPsec page, you can configure VPN tunnels based on IPsec
protocol.
IPsec is a protocol suite for securing IP communications.
Figure 156. The Functions / Advanced / IPsec page.
To allow IPsec tunnels, move the Enable switch to the right. Upon that the Tunnels and Status
sections and the Logging level drop-down list are displayed on the page.
In the Status section, the current state of an existing tunnel is displayed.
From the Logging level drop-down list, select a detail level of messages recorded to the system
log or leave the value specified by default. The Basic value is recommended to establish an IPsec
tunnel faster. To view the log, go to the Management / System Log page (see the System Log
section, page 212).
Page 156