D-Link AC1200 User Manual page 136

DIR-842V2 AC1200 Wi-Fi Gigabit Router
User Manual
To connect to a hidden network, select the Connect to hidden network value from the
Connecting to network drop-down list. Then enter the network name in the Network name
(SSID) field. If needed, fill in the BSSID field. Then select the needed type of authentication from
the Network authentication drop-down list.
When the Open or WEP authentication type is selected, the following settings are displayed on the
page:
Parameter
Enable encryption WEP
Default key ID
Encryption key WEP as
HEX
Encryption key
(1-4)
When the WPA-PSK, WPA2-PSK, WPA-PSK/WPA2-PSK mixed, WPA3-SAE, and WPA2-
PSK/WPA3-SAE mixed authentication type is selected, the following fields are displayed:
Parameter
Password PSK
Encryption type
When you have configured the parameters, click the APPLY button.
When connecting to a wireless access point, the wireless channel of DIR-842V2 will switch to
the channel of the access point to which you have connected.
In addition, the Connection Information section in which you can view the connection status
and the network basic parameters is displayed.
If you want to connect to the WISP network, after configuring the device as a client, you need to
create a WAN connection with relevant parameters for the WiFiClient_2GHz_1 interface in the
2.4GHz band or for the WiFiClient_5GHz_1 interface in the 5GHz band.
For Open authentication type only.
To activate WEP encryption, move the switch to the right. Upon that
the Default key ID drop-down list, the Encryption key WEP as
HEX switch, and four Encryption key fields are displayed on the
page.
The number of the key (from first to fourth) which will be used for
WEP encryption.
Move the switch to the right to set a hexadecimal number as a key
for encryption.
Keys for WEP encryption. The router uses the key selected from the
Default key ID drop-down list. It is required to specify all the
fields. Click the Show icon (
A password for WPA encryption. Click the Show icon (
display the entered password.
An encryption method: TKIP, AES, or TKIP+AES.
TKIP and TKIP+AES encryption types are not available for
WPA3-SAE and WPA2-PSK/WPA3-SAE mixed authentication
types.
Page 136
Configuring via Web-based Interface
Description
) to display the entered key.
Description
) to