Tecnosicurezza TechMaster User Instructions page 2

User instructions
Change code
( Safely store the new code and perform various opening / closing tests before closing the safe door )
To be performed with the door open!
Press and hold . The display shows the message:
To change the Manager code press
Enter the old code. The display shows the message:
Enter the new code. The display shows the message:
Confirm the new code.
Perform various opening / closing tests before closing the safe door.
Users management
Press and then . The display shows the message:
Enter the Manager code and scroll through the submenus with
access.
Press to scroll the list or enter the user ID.
" " installed user, "X" deleted user, "_" disabled user.

Overrides users can be installed only when the lock is open.
Press . If the user is not installed, the display shows the message:
Press to confirm, or
Membrane test
Press any key to turn on the device.
Press and hold the button
Press in sequence the buttons shown in the display.
A confirmation beep is given for each pushed key working properly.
A damaged key is indicated with a long beep. The display shows the message:
Change date and time
Press (or press and hold)
Enter the Master code. The display shows the message:
Press . The display shows the date and time currently set:
To modify, press . The display shows the message:
Enter time and date and press
Further information
For the complete manual and further information on the product's features, please visit
GLOBAL HEADQUARTERS
Tecnosicurezza SpA
Via Cesare Battisti. 276
37057 San Giovanni Lupatoto
Verona
Tel.+39 045 826 64 70
Fax. +39 045 826 64 69
info@tecnosicurezza.it
twice. The display shows the message:
to disable/enable/delete and
. The display shows the message:
. The display shows the message:
to confirm.
USA HEADQUARTERS
Versailles, KY 40383
Tel.+1 859 490 89 30
info@usatecno.com
IU_TechMaster_easy_03_eng
until Users management. Press
to confirm.
Tecnosicurezza Inc.
50, Thomas Lane
TechMaster
X X - X X X X X X
MANAGER CODE
CONFIRM CODE
MANAGER MENU
to
USERS MANAGEMENT
02 03 04 05 06

02
MEMBRANE TEST
1234567890
MEMBRANE TEST
1234567890
WRONG/FAULTY
TIME AND DATE
www.tecnosicurezza.it
SPAIN HEADQUARTERS
Tecnosicurezza Sa
C/Menor, 4 - Nave 10
Pol. Ind La Mina 28770
Colmenar Viejo
Tel.+34 91 804 33 91
Fax.+34 91 804 32 63
info@tecnosicurezza.es
OLD CODE
CHANGE
NEW CODE
X X X X X X
X X X X X X
OPERATION
DONE
X X X X X X
x _ _ 
INSTALL?


KEY
MASTER MENU
X X X X X X X X
SETTINGS
12:00 WED
13 /02/2019
hh:mm _ _ _
DD/MM/YYYY