Industry Compliance - Crestron infiNET CLW-SLVS1RF Operation Manual

Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF
Operations Guide - DOC. 6397
Physical View of CLW-SLVS1RF (Clockwise from Top; Top, Side, and Front)
1.75 in
(4.45 cm)
3.81 in
(9.68 cm)
3.28 in
(8.32 cm)
4.13 in
(10.48 cm)
The -SW1RF, -SW4RF, -SWS1RF, -SWS4RF, and -SLVS1RF mount in a standard
wallbox and are covered using a decorative faceplate (not included). All line voltage
connections are made at the rear of the switch.

Industry Compliance

These units have been manufactured to comply with UL's Standards for Safety in
Canada and the United States. Formal approval is pending.
FCC ID: EROCWD1011
Compliance Statement (Part 15.19 )
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that
may cause undesired operation.
Warning (Part 15.21)
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
RF Exposure (OET Bulletin 65)
To comply with FCC's RF exposure limits for general population / uncontrolled
exposure, this transmitter must be installed to provide a separation distance of at
least 20 cm from all persons and must not be co-located or operating in conjunction
with any other antenna or transmitter.
infiNET Switches: Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF • 7
infiNET™ Switches
1.88 in
(4.77 cm)
2.70 in
(6.86 cm)
1.50 in
(3.81 cm)